您好,欢迎进入江苏博鸿中锦制粒设备有限公司网站!
江苏博鸿中锦制粒设备有限公司
产品搜索
PRODUCT SEARCH
产品分类
PRODUCT CLASSIFICATION
大豆蛋白喷雾干燥机 Soy protein spray dryer
  • 品牌:江苏博鸿-喷雾干燥机
  • 货号:BH-1000
  • 价格: ¥257999/套
  • 发布日期: 2020-01-28
  • 更新日期: 2024-03-29
产品详请
外型尺寸 2000*3000*5000
品牌 江苏博鸿-喷雾干燥机
货号 BH-1000
型号 BH-1000

大豆蛋白喷雾干燥机|豌豆蛋白压力喷雾造粒塔烘干设备

Soy protein spray dryer | Pea protein pressure spray granulating tower drying equipment

 

江苏博鸿提供的喷雾干燥机,压力喷雾干燥设备,离心式喷雾干燥机,符合医药GMP/FDA要求。江苏博鸿生产制造的喷雾干燥设备性能稳定,模块化设计,提供先进的喷雾干燥整体解决方案实验喷雾干燥工艺实验样机。江苏博鸿是高品质喷雾干燥设备生产厂家,已提供数百套高品质喷雾干燥设备,客户遍布全国和欧洲/东南亚/中东等海外地区。


The spray dryer, pressure spray dryer and centrifugal spray dryer provided by jiangsu bohong meet the requirements of GMP/FDA. Jiangsu bohong manufacturing spray drying equipment stable performance, modular design, to provide you with advanced spray drying solutions and experimental spray drying process experimental prototype. Jiangsu bohong is a high quality spray drying equipment manufacturers, has provided more than hundreds of high quality spray drying equipment, customers throughout the country and Europe/southeast Asia/the Middle East and other overseas regions.


 

一、大豆蛋白喷雾干燥机--设备概述


喷雾干燥机为连续式常压干燥器的一种,用特殊设备将液料喷成雾状,使其与热空气接触而被干燥,用于干燥有些热敏性的液体、悬浮液和粘滞液体,如牛奶、蛋、单宁和药物等。

 

喷雾干燥机通过设置电机,启动喷雾干燥机开始工作,送风机吸入空气通过空气加热器加热传送到雾化器,雾化器把热的空气转换为热雾气输送到干燥塔内,从扩大口倒入产品到干燥塔内,即可开始干燥产品,启动电机,电机带动旋转桨开始转动,即可使落到旋转桨的产品打散,使其产品干燥的更加均匀,实现了产品进入到干燥塔内干燥效率高的目的


密封塞可为橡胶,密封塞可保护轴承出现卡堵的情况,拉动隔板离开出料口,干燥后的产品即可从出料口流出,启动引风机,干燥塔内部的雾气和部分干燥产品被吸入到旋风分离器内,旋风分离器连接有出料口,干燥的产品即可分离从出料口出来,雾气则被管道吸入到引风机传送到管道内,通过末气除尘器处理后从出气口被流出,即可实现喷雾干燥的目的。


喷雾干燥机,通过设置基座的顶部安装有支撑杆,是为了对旋风分离器起到更好的支撑作用,设置密封塞可为橡胶,橡胶的密封性好,耐磨损和耐腐蚀,有较长的使用寿命,设置所有管道和旋转桨分别可为铁和不锈钢,铁和不锈钢同样有较好的耐腐蚀能力,且自身有较好的支撑效果,不容易出现断裂,韧性强,提高了喷雾干燥机的质量,设置干燥塔的右侧开设有与管道相匹配的圆孔,是为了防止干燥塔内部的产品遗漏出来,进一步提高了喷雾干燥机自身物件连接使用的紧密性。

 


I. soybean protein spray dryer -- equipment overview

 

Spray dryer is a continuous atmospheric dryer, with special equipment to spray the liquid into a mist, so that it contact with hot air and dry, used to dry some heat sensitive liquid, suspension and viscous liquid, such as milk, eggs, tannins and drugs.

 

Spray drier by setting the motor, start the spray drying machine start working, blower air inhaled through the air heater heat transfer to the atomizer, atomizer the hot mist is converted to heat the air to the drying tower, from expanding into the product in the drying tower, can start drying product, start the motor, the motor drives the rotating blades began to turn, can make into rotating blade product break up, make its products more uniform dry, has realized the product into the purpose of drying tower drying efficiency.

 

Available for rubber sealing plug, bearing seal plug can be protection card wall, pull the diaphragm from discharging mouth, dry products can flow from discharging mouth, start the induced draft fan, the fog and part of the drying tower internal dry product inhaled in the cyclone separator, cyclone separator connected with discharging mouth, dry products can be separated from the discharging mouth, the fog is transmitted to the pipe in the pipe to the induced draft fan, after processing by the end of the air filter was out from the outlet, the purpose of the spray drying can be realized.

 

Spray drier, by setting the base support bar at the top of the installation, in order to better support to cyclone separator, set the seal plug for rubber, rubber sealing good, wear resistance and corrosion resistance, and have longer service life and set all the pipes and rotating propeller respectively for iron and stainless steel, iron and stainless steel also has good corrosion resistance, and itself has good supporting effect, it is not easy to break, strong toughness, improve the quality of the spray drier, set up the right side of the drying tower has grown to match the pipe of circular hole, is to prevent the inside of the drying tower products missing out, It further improves the tightness of the connection of the spray dryer.